Amino acid end-group in commercial heparin. III. Determination of the number of amino groups of amino acid and hexosamine residues per heparin molecule

The reactions of heparin with 2,4,6-trinitrobenzenesulfonic acid (TNBS) were studied spectrometrically. Seven different commercial heparins were used in this study. The amino groups react with TNBS to form equimolar amounts of trinitrophenylated (TNP) amino groups and bisulfite ions. The TNP-amino groups further react with bisulfite ions to form the monosubstituted anionic sigma complex. The absorption spectrum with two maxima at approximately 350 nm and approximately 420 nm, characteristic of either the TNP-amino groups or the complex, was analyzed for the reaction of TNBS with heparin. It was shown that the reactivities of TNBS with amino groups from α-amino acid and hexosamine residues are greatly different. By combining the results of the reaction kinetics and the reaction of heparin with Sanger's reagent, the number of the α-amino groups and the free amino groups in hexosamine residues were determined. These data have been performed with a range of heparins from different commercial sources, of different activities and physical characteristics. No correlation was found between the free amino contents of these heparins and biological potency. © 1993 John Wiley & Sons, Inc.     

Acidity distribution of carboxyl groups in Loy Yang brown coal: its analysis and the change by heat treatment

Brown coals have a considerable number of acidic functional groups of which the main component is carboxyl groups, and the acidity has a wide distribution. In this paper, changes of the acidity distribution were examined by aqueous titration when brown coal was heat-treated to control its acidity distribution. For Loy Yang brown coal from Australia dried at 50 degrees C under vacuum (LY50), the acid dissociation constant, Ka, was distributed over a wide pKa range between 2 and 9. Then, using Gaussian functions, the acidity distribution was divided into four groups, which were characterized by average pKa values: average pKa value of 3.8 (hereafter referred to as Group A), 5.2 (Group B), 6.8 (Group C), and 8.3 (Group D). Among them, Groups A, B, and C were assigned to carboxyl groups. From the changes of the number of carboxyl groups when brown coal was heat-treated up to 400 degrees C, it was found that the way of decrease was different among these acidic groups. The decrease of the amount of carboxyl groups in Group C was significant, and at 325 degrees C most of them disappeared. On the other hand, the carboxyl groups in Group A remained even at a high temperature of 400 degrees C. We estimated approximately the structures around carboxyl groups for LY50 and their structural changes by heat treatment using the known pKa values for simple carboxylic acids and the pKa values calculated by the MOPAC program for complicated carboxylic acids.     

Basic evaluation of highly sensitive thyroid stimulating hormone immunoradiometric assay kits

Usefulness of three kinds of TSH kits by immunoradiometric assay (IRMA) was evaluated. They were able to measure low levels (less than 0.1 microIU/ml) in serum thyroid stimulating hormone (TSH) with incubation of short time (4 hours). In particular, RIABEAD II kit had a highly specific affinity for TSH and the normal range (+/- 2 S.D.) using it showed from 0.20 to 3.50 microIU/ml in 150 normal subjects. In patients with hyperthyroidism and in patients with hypothyroidism, the values of TSH were lower and higher than those of normal subjects, respectively. Another kits showed similar results. These results indicate that these TSH-IRMA kits are useful to evaluate serum TSH levels exactly.     

Hydrogen analysis in solid samples by utilizing He metastable atoms induced by TEA CO2 laser plasma in He gas at 1 atm

A TEA CO₂ laser (350 mJ–1.5 J, 10.6 μm, 200 ns, 10 Hz) was focused onto a metal sub-target under He as host gas at 1 atmospheric pressure with a small amount of impurity gas, such as water and ethanol vapors. It was found that the TEA CO₂ laser with the help of the metal sub-target is favorable for generating a strong, large volume helium gas breakdown plasma at 1 atmospheric pressure, in which the helium metastable-excited state was then produced overwhelmingly. While the metal sub-target itself was never ablated. The helium metastable-excited state produced after the strong helium gas breakdown plasma was considered to play an important role in exciting the atoms. This was confirmed by the specific characteristics of the detected H emission, namely the strong intensity with low background, narrow spectral width, and the long lifetime. This technique can be used for gas and solid samples analysis. For nonmetal solid analysis, a metal mesh was introduced in front of the nonmetal sample surface to help initiation of the helium gas breakdown plasma. For metal sample, analysis can be carried out by combining the TEA CO₂ laser and an Nd–YAG laser where the Nd–YAG laser is used to ablate the metal sample. The ablated atoms from the metal sample are then sent into the region of helium gas breakdown plasma induced by the TEA CO₂ laser to be excited through the helium metastable-excited state. This technique can be extended to the analysis of other elements, not limited only to hydrogen, such as halogens.     

Conformationally controlled (entropy effects), stereoselective vibrational quenching of singlet oxygen in the oxidative cleavage of oxazolidinone-functionalized enecarbamates through solvent and temperature variations

On photooxygenation (methylene blue as sensitizer) of E/Z enecarbamates, equipped with the oxazolidinone chiral auxiliary, the oxidative cleavage of the alkenyl functionality releases the enantiomerically enriched methyldesoxybenzoin (MDB) product. The extent (% ee) as well as the sense (R vs S) of the stereoselectivity in the MDB formation depends on the choice of the alkene configuration; the efficacy of stereocontrol may be tuned by appropriate solvent and temperature conditions. Highlighted is the finding that the formation of the preferred MDB enantiomer (R or S) depends for the E isomer on the chosen solvent and temperature, but not for the corresponding Z isomer. The activation parameters for the various solvents disclose that differential entropy effects (ΔΔS^‡) dominate the conformationally more flexible E diastereomers. As mechanistic rationale for this unprecedented conformationally imposed stereochemical behavior, we propose the competitive action of stereoselective vibrational quenching of the attacking singlet oxygen by the enecarbamate versus sterically controlled stereoselective oxidative cleavage of its double bond.     

Preparation and characterization of silica—polyimide composite membranes coated on porous tubes for CO2 separation

Silica-polyimide microcomposite membranes were prepared on γ-alumina-coated α-alumina support tubes, and their gas permeation properties were evaluated with He, N₂ and CO₂. Smoothing of the substrate surface and hybridization of silica and polyamic acid were both effective to form defect-free thin composite membranes. The CO₂ permeance of a membrane with a silica content of 68 wt% was one order of magnitude higher than that of a polyimide membrane having the same thickness. The permselectivity of CO₂ to N₂ was 30 at 30°C and 13 at 100°C. Contributions of the silica and polyimide phases to permeance of the composite membrane were analyzed with a two-phase permeation model. The effective thickness of the rate-controlling polyimide phase was less than one-tenth of the total thickness of the silica-polyimide membrane.     

Staphylionosides A-K: megastigmane glucosides from the leaves of Staphylea bumalda DC

Chemical investigation of leaves of Staphylea bumalda DC., collected in the suburbs of Hiroshima City, afforded 11 new megastigmane glucosides, named staphylionosides A-K (3-13), along with two known megastigmane glucosides (1, 2). The relative structures were elucidated from spectroscopic evidence, and the absolute structures of the aglycones were determined by means of the combination of beta-D-glucosylation-induced shift-trends and the modified Mosher's method.     

Ligand-exchange ion chromatographic determination of malic acid enantiomers in apple juice with photometric detection.

An ion chromatographic separation with photometric detection using a chiral copper(II) complex as the eluent has been developed for the resolution of enantiomers of malic acid in commercially available apple juices. The results obtained by this method were in good agreement with those by an enzymatic method with separation by high-performance liquid chromatography.     

Platanionosides D-J: megastigmane glycosides from the leaves of Alangium platanifolium (Sieb. et Zucc.) Harms var. platanifolium Sieb. et Zucc

From the leaves of Alangium paltanifolium var. platanifolium, collected in Fukuoka Prefecture, twelve further megastigmane glycosides were isolated. Seven of them, named platanionosides D-J (1-7), were found to be new compounds. Their structures were elucidated from spectroscopic evidence and their absolute structures were determined from beta-D-glucosylation-induced shift trends of 13C-NMR and by application of a modified Mosher's method.     

Synthesis of polymers by use of divalent metal salts of monohydroxyethyl phthalate: Metal-containing isocyanurate-type crosslinked polyurethanes

Divalent metal salts (I) of monohydroxyethyl phthalate have catalytic activity for polymerization of isocyanate groups. The synthesis of novel metal-containing isocyanurate-type crosslinked polyurethanes were investigated by the crosslinking reaction of I in DMF with diisocyanates or urethane prepolymers, that is, diisocyanate adducts of polyethylene glycol. 2,4-Toluene diisocyanate and diphenylmethane diisocyanate were used as diisocyanates, and DMF was the solvent. The crosslinking reactions were followed by determining the gelation time. Gelation time decreased with increasing temperature. The Ca salt was more effective than the Mg salt in the crosslinking reaction. The yields of resulting metal-containing three-dimensional polymers decreased with increasing metal content in the feed. The Ca salt was more easily introduced into the network polymers than the Mg salt was. Decomposition temperatures decreased on introducing metals into the network polymers. Some physical properties of the metal-containing network polymers are also discussed.